Adit Turntech / Drawings
Drawing library, grouped by part family.
Clean sections and isometric views redrawn for reference, carrying only the basic sizes, bores and finishes a buyer needs. Every part is turned in-house in Bhosari MIDC, Pune, in SS316L and SS304L under an ISO 9001:2015 certified quality system. Send us your own drawing and we will quote against it directly.
Tank ferrules & weld-in ports
Weld-in vessel ports with a Tri-Clamp face on the outside and a plain or flanged weld end on the vessel side. Turned single-piece so the clamp face stays crevice-free.
6 drawings
Tank weldable ferrules
Tank weldable ferrule, 1/2"
Ø25.0 clamp face × Ø9.4 bore, 1/2" tube
SS316L · ASME BPE
Tank ferrule, 1.5"
Ø50.394 clamp face × Ø34.798 bore
SS316L · ASME BPE
Tank ferrule, 3"
Ø77.394 clamp face × Ø60.198 bore
SS316L · ASME BPE
Tank weldable ferrule, 1.5" TC × 1" pipe
Ø50.5 clamp face × Ø22.1 bore
SS316L · ASME BPE
Jacket ferrules & nozzles
Ports that pass through a jacketed vessel wall, with a pipe stub sized to schedule so the nozzle can be welded straight into the jacket shell.
2 drawings
Closures & end caps
Solid clamp closures for shutting off vessel ports and pipe runs during CIP, pressure testing and validation.
1 drawing
Agitation & mixing parts
Turned shaft sleeves, hubs and bushes for single-use and stainless mixers, machined to drawing with ground seal seats.
1 drawing
Views are reference reconstructions for sizing and comparison only, not manufacturing drawings. Customer drawings stay confidential — nothing identifying a client, project or document reference is shown here.
